Twisting Wrench for Bar-stock (New style!)
The twisting wrench is your solution for twisting multiple sizes of square bar stock with one tool.
18” x 2” x 3/8”
The tool is designed to twist 4 different sizes of bar stock, 3/8, 1/2, 5/8, 3/4”, The slots are in the center for better twist control. The center is especially good for larger stock where the wrench is wider. The smaller sizes are helpful for more delicate twisting projects. The tool is made of A35 plate steel, .375″ thick. It is recommended that this tool be used with hot iron. However, tweaking can be done on warm iron and twists can be made on smaller sizes cold.
These are made with slots as opposed to holes so that you can twist anywhere along the piece, wherever you would like, not being limited to just going from the end. This style of makes it very easy to quickly twist small or large sections during one heat.
The twisting wrench is your solution for twisting multiple sizes of square bar stock with one tool.
18” x 2” x 3/8”
The tool is designed to twist 4 different sizes of bar stock, 3/8, 1/2, 5/8, 3/4”, The slots are in the center for better twist control. The center is especially good for larger stock where the wrench is wider. The smaller sizes are helpful for more delicate twisting projects. The tool is made of A35 plate steel, .375″ thick. It is recommended that this tool be used with hot iron. However, tweaking can be done on warm iron and twists can be made on smaller sizes cold.
These are made with slots as opposed to holes so that you can twist anywhere along the piece, wherever you would like, not being limited to just going from the end. This style of makes it very easy to quickly twist small or large sections during one heat.
The twisting wrench is your solution for twisting multiple sizes of square bar stock with one tool.
18” x 2” x 3/8”
The tool is designed to twist 4 different sizes of bar stock, 3/8, 1/2, 5/8, 3/4”, The slots are in the center for better twist control. The center is especially good for larger stock where the wrench is wider. The smaller sizes are helpful for more delicate twisting projects. The tool is made of A35 plate steel, .375″ thick. It is recommended that this tool be used with hot iron. However, tweaking can be done on warm iron and twists can be made on smaller sizes cold.
These are made with slots as opposed to holes so that you can twist anywhere along the piece, wherever you would like, not being limited to just going from the end. This style of makes it very easy to quickly twist small or large sections during one heat.
