Large Pexto Stake Plate, 11x8.5
Pexto Style Stake Plate
The stake plate is approx. 11" long and 8 1/2" wide.
The plate has two pexto tapers that measure 1 9/16" at the widest point
and tapers down to 1 3/16" at the bottom. The taper is almost 2" deep
and almost 1/2" thick all around. This is thicker and more durable than
most pexto plates from the past. The plate has three mounting hole to
secure in you bench. The plate also has a 1 1/8 x 1 3/4 hardy hole for
other tools. The plate is 1/2" thick and will hold up nicely for years
to come. The tools are made of tough 60/45 ductile iron. These castings
have been produced for many years and have proven to be very reliable
and useful. We have several different products in our catalog that is used in this tool. Casting weighs approx. 12 lbs. Made in the USA!
Pexto Style Stake Plate
The stake plate is approx. 11" long and 8 1/2" wide.
The plate has two pexto tapers that measure 1 9/16" at the widest point
and tapers down to 1 3/16" at the bottom. The taper is almost 2" deep
and almost 1/2" thick all around. This is thicker and more durable than
most pexto plates from the past. The plate has three mounting hole to
secure in you bench. The plate also has a 1 1/8 x 1 3/4 hardy hole for
other tools. The plate is 1/2" thick and will hold up nicely for years
to come. The tools are made of tough 60/45 ductile iron. These castings
have been produced for many years and have proven to be very reliable
and useful. We have several different products in our catalog that is used in this tool. Casting weighs approx. 12 lbs. Made in the USA!
Pexto Style Stake Plate
The stake plate is approx. 11" long and 8 1/2" wide.
The plate has two pexto tapers that measure 1 9/16" at the widest point
and tapers down to 1 3/16" at the bottom. The taper is almost 2" deep
and almost 1/2" thick all around. This is thicker and more durable than
most pexto plates from the past. The plate has three mounting hole to
secure in you bench. The plate also has a 1 1/8 x 1 3/4 hardy hole for
other tools. The plate is 1/2" thick and will hold up nicely for years
to come. The tools are made of tough 60/45 ductile iron. These castings
have been produced for many years and have proven to be very reliable
and useful. We have several different products in our catalog that is used in this tool. Casting weighs approx. 12 lbs. Made in the USA!
