Tinsmith Pexto 4 Piece Stake set (Large 1 Hole Pexto Plate, 2 Mushrooms, Bick Anvil) (modified set)
The Pexto set consists of a single stake plate, 4” mushroom stake, 2” mushroom stake and a small bick anvil.
Set has been modified as we are out of the 11’ plate shown.
Will hold our Pexto Style stakes including our largest bick iron!
The plate has one Pexto taper that measures 1-9/16" at the widest point and tapers down to 1 3/16" at the bottom. The taper is almost 3" deep and almost 3/4" thick all around. This is thicker and more durable than all Pexto plates from the past. The plate has divots for drilling mounting holes to secure your bench. & will hold up nicely for years to come.
The 4” and 2” hefty steel mushroom stakes are built to withstand the heavy use associated with blacksmithing, armoring, and jewelry making cold and hot steel, copper, brass, tin, etc..
The work surfaces are domed and ideal for forming and planishing a wide variety of metals. Constructed iof tough 60/45/12 ductile iron and have a tapered shank to fit most Pexto type stake plates.
Note, the 4” mushroom is lost wax cast and is slightly polished, the 2” is foundry cast finish.
The size and shape of the Bick Anvil is perfect for the smaller projects that are too small for the traditional size anvil.
The bick anvil tool measures 7 1/4" long from the end of the horn to the back of the anvil face. The anvil face measures 2" wide and 3 1/8" long and the horn is 1 1/2" wide at the largest point and tapers down to a point. The tapered shank is 1 3/8" at the widest point and tapers down the 4" long taper to 3/4".
These anvil tools will polish to a very fine finish. Be sure to check out her other pexto tools that will fit in this plate.
The Pexto set consists of a single stake plate, 4” mushroom stake, 2” mushroom stake and a small bick anvil.
Set has been modified as we are out of the 11’ plate shown.
Will hold our Pexto Style stakes including our largest bick iron!
The plate has one Pexto taper that measures 1-9/16" at the widest point and tapers down to 1 3/16" at the bottom. The taper is almost 3" deep and almost 3/4" thick all around. This is thicker and more durable than all Pexto plates from the past. The plate has divots for drilling mounting holes to secure your bench. & will hold up nicely for years to come.
The 4” and 2” hefty steel mushroom stakes are built to withstand the heavy use associated with blacksmithing, armoring, and jewelry making cold and hot steel, copper, brass, tin, etc..
The work surfaces are domed and ideal for forming and planishing a wide variety of metals. Constructed iof tough 60/45/12 ductile iron and have a tapered shank to fit most Pexto type stake plates.
Note, the 4” mushroom is lost wax cast and is slightly polished, the 2” is foundry cast finish.
The size and shape of the Bick Anvil is perfect for the smaller projects that are too small for the traditional size anvil.
The bick anvil tool measures 7 1/4" long from the end of the horn to the back of the anvil face. The anvil face measures 2" wide and 3 1/8" long and the horn is 1 1/2" wide at the largest point and tapers down to a point. The tapered shank is 1 3/8" at the widest point and tapers down the 4" long taper to 3/4".
These anvil tools will polish to a very fine finish. Be sure to check out her other pexto tools that will fit in this plate.
The Pexto set consists of a single stake plate, 4” mushroom stake, 2” mushroom stake and a small bick anvil.
Set has been modified as we are out of the 11’ plate shown.
Will hold our Pexto Style stakes including our largest bick iron!
The plate has one Pexto taper that measures 1-9/16" at the widest point and tapers down to 1 3/16" at the bottom. The taper is almost 3" deep and almost 3/4" thick all around. This is thicker and more durable than all Pexto plates from the past. The plate has divots for drilling mounting holes to secure your bench. & will hold up nicely for years to come.
The 4” and 2” hefty steel mushroom stakes are built to withstand the heavy use associated with blacksmithing, armoring, and jewelry making cold and hot steel, copper, brass, tin, etc..
The work surfaces are domed and ideal for forming and planishing a wide variety of metals. Constructed iof tough 60/45/12 ductile iron and have a tapered shank to fit most Pexto type stake plates.
Note, the 4” mushroom is lost wax cast and is slightly polished, the 2” is foundry cast finish.
The size and shape of the Bick Anvil is perfect for the smaller projects that are too small for the traditional size anvil.
The bick anvil tool measures 7 1/4" long from the end of the horn to the back of the anvil face. The anvil face measures 2" wide and 3 1/8" long and the horn is 1 1/2" wide at the largest point and tapers down to a point. The tapered shank is 1 3/8" at the widest point and tapers down the 4" long taper to 3/4".
These anvil tools will polish to a very fine finish. Be sure to check out her other pexto tools that will fit in this plate.
